|کد مقاله||سال انتشار||مقاله انگلیسی||ترجمه فارسی||تعداد کلمات|
|147129||2017||8 صفحه PDF||سفارش دهید||4066 کلمه|
Publisher : Elsevier - Science Direct (الزویر - ساینس دایرکت)
Journal : Procedia Structural Integrity, Volume 5, 2017, Pages 600-607
The object of this paper is to determine the statistics of parameters of hyperelastic models specific to Polybutylene Terephthalate filled with 30% glass fibre (PBT GF30) and Polymethyl Methacrylate (PMMA) materials used in automotive lamps. The hyperelastic behaviour of both materials, a semi-crystalline and an amorphous, is modelled using appropriate hyperelastic models. The stress-strain curves of the materials were measured under uniaxial tension using a non-contact video gauge. Five samples each were tested to measure the effect of manufacturing variability. The model parameter statistics were determined, the mean value of the model parameters were used to construct average stress-strain behavior, which is then compared to the experimental stresses. Among all the models and their associated parameters studied, the 3-parameter Mooney-Rivlin model provided the most accurate prediction of the behaviour for both materials. The model showed excellent stability and is therefore the most appropriate model to represent variations due to the manufacturing process. The detailed study of the correlation of the model parameters provided a good understanding of how the parameters are related to each other, enabling construction of complete probability distribution functions for further analysis.