|کد مقاله||سال انتشار||مقاله انگلیسی||ترجمه فارسی||تعداد کلمات|
|158913||2018||27 صفحه PDF||سفارش دهید||محاسبه نشده|
Publisher : Elsevier - Science Direct (الزویر - ساینس دایرکت)
Journal : Ceramics International, Volume 44, Issue 5, 1 April 2018, Pages 5587-5593
The effects of the sintering support design on the microstructural and mechanical properties of NiO/YSZ anode support micro-tubes are investigated in this study. For this purpose, a number of micro-tubes of the same geometrical properties are fabricated via extrusion method from the same extrusion paste. The micro-tubes are then sintered at the same temperature on sintering plates with different C- and V-type sintering channels designed. The micro-tubes after sintering are found to have similar geometric properties. However, the microstructural investigations and three point bending tests indicate that the microstructural properties of the micro-tubes are strongly influenced by the sintering plate design. As a result, the flexural strength of the micro-tubes are found to be different. Among the cases considered, the micro-tubes of V2 (half of the micro-tube is initially in the V-type channel) and V4 (whole micro-tube is initially in the V-type channel) design provide relatively fine microstructure and thus relatively higher flexural strength values at a reliability of 80%. The flexural strengths of these micro-tubes are also found to be more consistent.