تخصیص تحمل همزمان و برنامه ریزی برای مجموعه های پیچیده
|کد مقاله||سال انتشار||مقاله انگلیسی||ترجمه فارسی||تعداد کلمات|
|43728||2015||12 صفحه PDF||سفارش دهید||محاسبه نشده|
Publisher : Elsevier - Science Direct (الزویر - ساینس دایرکت)
Journal : Robotics and Computer-Integrated Manufacturing, Volume 35, October 2015, Pages 84–95
Traditionally, tolerance allocation and scheduling have been dealt with separately in the literature. The aim of tolerance allocation is to minimize the tolerance cost. When scheduling the sequence of product operations, the goal is to minimize the makespan, mean flow time, machine idle time, and machine idle time cost. Calculations of manufacturing costs derived separately using tolerance allocation and scheduling separately will not be accurate. Hence, in this work, component tolerance was allocated by minimizing both the manufacturing cost (sum of the tolerance and quality loss cost) and the machine idle time cost, considering the product sequence. A genetic algorithm (GA) was developed for allocating the tolerance of the components and determining the best product sequence of the scheduling. To illustrate the effectiveness of the proposed method, the results are compared with those obtained with existing wheel mounting assembly discussed in the literature.