ادغام مستقیم مهندسی معکوس و نمونه سازی سریع بر اساس خواص NURBS یا B-Spline
|کد مقاله||سال انتشار||مقاله انگلیسی||ترجمه فارسی||تعداد کلمات|
|52702||2004||9 صفحه PDF||سفارش دهید||5232 کلمه|
Publisher : Elsevier - Science Direct (الزویر - ساینس دایرکت)
Journal : Precision Engineering, Volume 28, Issue 3, July 2004, Pages 293–301
As product varieties increase and life cycles shorten, the need to reduce product development time becomes more critical to maintain competitiveness in the market. The reduction of the product development time, therefore, requires revolutionary improvements rather than gradual changes in technology. Based on a novel strategy the procedure for integration of reverse engineering and rapid prototyping was developed in this paper. Direct integration of reverse engineering and rapid prototyping is not a new issue and its importance has been demonstrated by many authors. However, all traditional algorithms for integration of RE and RP operate on scattered points directly such that some useful information for example curvature, normal and geometric shape, which are necessary for adaptive slicing in RP, cannot be obtained. To resolve the difficult dilemma a new algorithm is developed to build a bridge between scattered points and adaptive slicing.