ویژگی های حرارتی و ساخت بسته LED مبتنی بر سیلیکون
|کد مقاله||سال انتشار||مقاله انگلیسی||ترجمه فارسی||تعداد کلمات|
|58060||2016||8 صفحه PDF||سفارش دهید||محاسبه نشده|
Publisher : Elsevier - Science Direct (الزویر - ساینس دایرکت)
Journal : Microelectronics Reliability, Volume 56, January 2016, Pages 53–60
In this paper, the cost of a light emitting diode (LED) package is lowered by using a silicon substrate as the base attached to the chip, in contrast to the conventional chip-on-board (COB) package. In addition we proposed an LED package with a new structure to promote reliability and lifespan by maximizing heat dissipation from the chip. We designed an LED package combining the advantages of COB based on conventional metal printed circuit board (PCB) and the merits of a silicon sub-mount as a substrate. When an input current 500–1000 mA was applied, the fabricated LED exhibited the light output of approximately 112 lm/W at 29 W. We also measured and compared the thermal resistance of the sub-mount package and conventional COB package. The measured thermal resistance of the sub-mount package with a reflective film of Ag and the COB package were 0.625 K/W and 1.352 K/W, respectively.