جمع آوری داده ها همکاری مبتنی بر برچسب و شارژ مجدد انرژی در شبکه های حسگر RFID منطقه گسترده
|کد مقاله||سال انتشار||مقاله انگلیسی||ترجمه فارسی||تعداد کلمات|
|67550||2016||15 صفحه PDF||سفارش دهید||12270 کلمه|
Publisher : Elsevier - Science Direct (الزویر - ساینس دایرکت)
Journal : Ad Hoc Networks, Volume 36, Part 1, January 2016, Pages 214–228
The Wireless Identification and Sensing Platform (WISP) conjugates the identification potential of the RFID technology and the sensing and computing capability of the wireless sensors. Practical issues, such as the need of periodically recharging WISPs, challenge the effective deployment of large-scale RFID sensor networks (RSNs) consisting of RFID readers and WISP nodes. In this view, the paper proposes cooperative solutions to energize the WISP devices in a wide-area sensing network while reducing the data collection delay. The main novelty is the fact that both data transmissions and energy transfer are based on the RFID technology only: RFID mobile readers gather data from the WISP devices, wirelessly recharge them, and mutually cooperate to reduce the data delivery delay to the sink. Communication between mobile readers relies on two proposed solutions: a tag-based relay scheme, where RFID tags are exploited to temporarily store sensed data at pre-determined contact points between the readers; and a tag-based data channel scheme, where the WISPs are used as a virtual communication channel for real time data transfer between the readers. Both solutions require: (i) clustering the WISP nodes; (ii) dimensioning the number of required RFID mobile readers; (iii) planning the tour of the readers under the energy and time constraints of the nodes. A simulative analysis demonstrates the effectiveness of the proposed solutions when compared to non-cooperative approaches. Differently from classic schemes in the literature, the solutions proposed in this paper better cope with scalability issues, which is of utmost importance for wide area networks.