دانلود مقاله ISI انگلیسی شماره 138552
ترجمه فارسی عنوان مقاله

سیستم فتوولتائیک داده های مشتق شده برای تعیین منبع خورشیدی و برای مدل سازی عملکرد سایر سیستم های فتوولتائیک

عنوان انگلیسی
Photovoltaic system derived data for determining the solar resource and for modeling the performance of other photovoltaic systems
کد مقاله سال انتشار تعداد صفحات مقاله انگلیسی
138552 2017 9 صفحه PDF
منبع

Publisher : Elsevier - Science Direct (الزویر - ساینس دایرکت)

Journal : Solar Energy, Volume 147, 1 May 2017, Pages 349-357

ترجمه کلمات کلیدی
تابش نور مستقیم، تابش افقی افقی، عملکرد سیستم فتوولتائیک، مدل،
کلمات کلیدی انگلیسی
Direct normal irradiance; Diffuse horizontal irradiance; Photovoltaic system performance; Model;
پیش نمایش مقاله
پیش نمایش مقاله  سیستم فتوولتائیک داده های مشتق شده برای تعیین منبع خورشیدی و برای مدل سازی عملکرد سایر سیستم های فتوولتائیک

چکیده انگلیسی

Using performance data from some of the millions of installed photovoltaic (PV) modules with micro-inverters may afford the opportunity to provide ground-based solar resource data critical for developing PV projects. A method was developed to back-solve for the direct normal irradiance (DNI) and the diffuse horizontal irradiance (DHI) from the measured ac power of south-facing PV module/micro-inverter systems. The method was validated using one year of irradiance and PV performance measurements for five PV systems, each with a different tilt/azimuth orientation, and located in Golden, Colorado. Compared to using a measured global horizontal irradiance for PV performance model input, using the back-solved values of DNI and DHI only increased the range of mean bias deviations from measured values by 0.6% for the modeled annual averages of the global tilt irradiance and ac power for the five PV systems. Correcting for angle-of-incidence effects is an important feature of the method to prevent underestimating the solar resource and for modeling the performance of PV systems with more dissimilar PV module orientations. The results for the method were also shown more favorable than the results when using an existing power projection method for estimating the ac power.