دانلود مقاله ISI انگلیسی شماره 63003
ترجمه فارسی عنوان مقاله

توصیف رمانی از یک فضای طراحی برای گرانولیت بستر مایع

عنوان انگلیسی
Novel description of a design space for fluidised bed granulation
کد مقاله سال انتشار تعداد صفحات مقاله انگلیسی
63003 2007 7 صفحه PDF
منبع

Publisher : Elsevier - Science Direct (الزویر - ساینس دایرکت)

Journal : International Journal of Pharmaceutics, Volume 345, Issues 1–2, 10 December 2007, Pages 101–107

ترجمه چکیده
اندازه گیری های فیزیکی گرانولاتور بستر سیال می تواند در ساخت یک پنجره عملیاتی، یک فضای طراحی برای عملکرد فرآیند مورد بهره برداری قرار گیرد. هدف از این مطالعه تعیین تاثیر تغییرات رطوبت هوا ورودی به درجه حرارت در قسمت های مختلف یک سیستم گرانولاتور، رفتار فرسایش و اندازه ذرات گرانول های نهایی است. تنظیم کننده رطوبت بر روی یک دانه گرانوله مایع مقیاس در نظر گرفته شده است که سطح رطوبت بالا و تغییرات رطوبت هوا را افزایش می دهد. گرانول های ایبوپروفن در سطوح مختلف رطوبت هوا ورودی طبقه بندی شده به عنوان کم، متوسط ​​و بالا تولید می شود. یک پارامتر مایع روان شناختی توسعه یافت. بدتر از آن که ذرات مایع را جوش داده بودند، نسبت جریان هوا و سرعت فن، کوچکتر بود. چهار حالت شکست مختلف شناسایی شده و طبقه بندی شدند، بر اساس پارامتر مایع سازی: بیش از حد مایع شدن، خطر نشت مایع شدن، نشت مایع سازی و تخت فرو می ریزند. این امکان برای ساخت مسیرهای فرآیند برای فرسایش صاف بود که باید به دنبال فرآیند گرانولیز بهینه باشد.

چکیده انگلیسی

The physical measurements of a fluid bed granulator can be exploited in construction of an operating window, a design space, for process performance. The purpose of this study was to determine the influence of inlet air humidity changes on temperature in different parts of a granulator system, on fluidisation behaviour and on the particle size of the final granules. A humidifying setup was constructed on a bench-scale fluid bed granulator that enabled elevated humidity levels and sharp humidity changes of the inlet air. Ibuprofen granules were produced at the various inlet air humidity levels classified as low, intermediate and high. A novel fluidisation parameter was developed. The more improperly the particles were fluidising the smaller was the relationship of airflow rate and fan speed. Four different failure modes were identified and classified, based on the fluidisation parameter: over-fluidisation, risk of improper fluidisation, improper fluidisation and collapsed bed. It was possible to construct process trajectories for smooth fluidisation, which the optimal granulation process should follow.