دانلود مقاله ISI انگلیسی شماره 137621
ترجمه فارسی عنوان مقاله

تولید و عملکرد یک دستگاه تولید برق بر اساس واحدهای برداشت انرژی پیزوالکتریک برای پیاده روها

عنوان انگلیسی
Fabrication and performance of a power generation device based on stacked piezoelectric energy-harvesting units for pavements
کد مقاله سال انتشار تعداد صفحات مقاله انگلیسی
137621 2018 12 صفحه PDF
منبع

Publisher : Elsevier - Science Direct (الزویر - ساینس دایرکت)

Journal : Energy Conversion and Management, Volume 163, 1 May 2018, Pages 196-207

ترجمه کلمات کلیدی
برداشت انرژی، پیزوالکتریک، دستگاه تولید برق، واحدهای انباشته شده خروجی برق، مهندسی خاکریزی،
کلمات کلیدی انگلیسی
Energy-harvesting; Piezoelectric; Power generation device; Stacked units; Electrical output; Pavement engineering;
پیش نمایش مقاله
پیش نمایش مقاله  تولید و عملکرد یک دستگاه تولید برق بر اساس واحدهای برداشت انرژی پیزوالکتریک برای پیاده روها

چکیده انگلیسی

Although piezoelectric power generation for pavements is technically feasible, harvesting energy in a stable and efficient manner still presents several challenges. This paper designs and assesses stacked piezoelectric energy-harvesting power generation devices for pavements, in which energy output and road coupling are considered. Following corresponding technical specifications, the dimensions of the proposed power generation device are determined, and the unit is assembled for subsequent testing in terms of its electrical energy outputs. The energy outputs are analyzed in various series and parallel configurations of the units, different loads, and frequency conditions. Results indicate that power generation device with the dimension of 100 mm × 100 mm achieves optimal power generation outputs. The electrical output is positively correlated to the number of parallel piezoelectric energy-harvesting units, the magnitude of load, and the frequency of traffic action. The maximum output at the 0.2 MPa load magnitude and 10 Hz load frequency is 0.88 mW, and the corresponding optimum load is 20 kΩ. The maximum output at the 0.7 MPa and 15 Hz load level can reach up to 11.67 mW, and the corresponding optimum load is 10 kΩ. Subsequently, Mechanical Testing and Simulation (MTS) is performed with 40,000 load cycles, and the overall deformation of the power generation device is minimal and the electrical outputs of the piezoelectric energy-harvesting units remain stable. Finally, future research plan is discussed.