عوامل مؤثر بر ویژگی فتوولتائیک و مطالعه مقایسه ای بین دو الگوریتم ردیابی نقطه حداکثر قدرت

This paper presents the characterization and the modeling of the electric characteristics of currentvoltage and power–voltage of the photovoltaic (PV) panels. The philosophy behind digital simulation of solar energy systems is that experiments which normally should be done on real systems under high assembling costs can be done numerically in a short time on a computer, thus saving time and investments. The electric parameters of PV cells and the optimal electric quantities of PV panels have been analyzed (voltage and power) according to the meteorological variations (Temperature, solar irradiation …). The obtained results show that the diode parameters of the PV cells depend on solar irradiation: the current saturation increases with solar irradiation. This induces a decrease of the optimal voltage with solar irradiation; when the solar irradiation varies from 600 W/m2 to 1000 W/m2. By taking into consideration all the modeling results, the electric behavior of the cells association in parallels or in series, as well as the aging of a PV panel have been analyzed. Moreover, a comparative study between two types of MPPT techniques that are used in photovoltaic systems to extract the maximum power have been introduced which are Perturb and Observe (P &O) and Incremental Conductance (INC).