دانلود مقاله ISI انگلیسی شماره 57444
ترجمه فارسی عنوان مقاله

تعیین میزان جامدات جامد و چربی محصولات کامل تخم مرغ مایع از طریق اندازه گیری پارامترهای الکتریکی بر اساس خواص ترانسفورماتور

عنوان انگلیسی
Determining total solids and fat content of liquid whole egg products via measurement of electrical parameters based on the transformer properties
کد مقاله سال انتشار تعداد صفحات مقاله انگلیسی
57444 2015 8 صفحه PDF
منبع

Publisher : Elsevier - Science Direct (الزویر - ساینس دایرکت)

Journal : Biosystems Engineering, Volume 129, January 2015, Pages 70–77

ترجمه کلمات کلیدی
محتوای جامد جامد محتوای چربی، محصولات تخم مرغ کامل مایع، خواص ترانسفورماتور، ولتاژ ترمینال، λ ارزش
کلمات کلیدی انگلیسی
Total solids content; Fat content; Liquid whole egg products; Transformer properties; Terminal voltage; λ value

چکیده انگلیسی

A method for determining the total solids and fat content of liquid whole egg products based on the principle of transformer was developed. The electrical parameters (terminal voltage and λ value) in the secondary circuit, where the sample acted as the coil, were investigated under the action of alternating magnetic flux in the frequency range from 60 to 400 Hz. Findings indicated that subtle changes of quality indices could be detected by electrical parameters based on the transformer properties that relate to the amount of free ions in the samples. As the inductive voltage was fixed, terminal voltage was negatively correlated with quality indices of total solids and fat content. Therefore the decrement of impedance in the secondary circuit caused the increment of inductive current according to Ohm's law. Linear prediction models for the aforementioned quality indices based on these electrical parameters were also established. Judging from coefficients of determination (R2) and the root mean square error of prediction (RMSEP) of these models, the λ value was found to be a better predictor for quality indices of liquid whole egg products than terminal voltage. It is believed that this method has the potential to evaluate the quality of liquid food materials over a wider frequency and temperature range.