دانلود مقاله ISI انگلیسی شماره 57831
ترجمه فارسی عنوان مقاله

استخراج گرما از سیستم های جدید الگوی چاه زیرزمینی برای بهره برداری از انرژی زمین گرمایی

عنوان انگلیسی
Heat extraction of novel underground well pattern systems for geothermal energy exploitation
کد مقاله سال انتشار تعداد صفحات مقاله انگلیسی
57831 2016 12 صفحه PDF
منبع

Publisher : Elsevier - Science Direct (الزویر - ساینس دایرکت)

Journal : Renewable Energy, Volume 90, May 2016, Pages 83–94

ترجمه کلمات کلیدی
سیستم های جدید الگوی چاه زیرزمینی؛ درجه حرارت تولید؛ فشار تولید؛ بهره برداری زمین گرمایی؛ مدل سازی عددی
کلمات کلیدی انگلیسی
Underground well pattern systems; Production temperature; Production pressure; Geothermal exploitation; Numerical modeling
پیش نمایش مقاله
پیش نمایش مقاله  استخراج گرما از سیستم های جدید الگوی چاه زیرزمینی برای بهره برداری از انرژی زمین گرمایی

چکیده انگلیسی

The current Enhanced Geothermal Systems (EGS) with a fractured reservoir undergoes several practical issues, such as scaling in the wellbore, the mass flow loss into the reservoir, and the challenge in designing the placement of production wells. In this paper, novel underground well pattern systems were proposed for geothermal energy exploitation. A numerical model of two kinds well pattern systems (multi-horizontal-wells system and annular-wells system) were setup taking into account the heat exchange with the surrounding formation. The numerical model was validated by the logging data from Ordos CO2 geological storage demonstration project, China. A comparison between the well pattern system and a fractured reservoir was conducted based on European EGS site at Groβ Schonebekc, Germany. Results showed that when the horizontal well length of well pattern system was about 10 times to the fractured reservoir, the production wellhead temperature and pressure of eight horizontal wells system with CO2 were respectively 38.9 °C higher and 10.9 MPa higher than that of the fractured reservoir system with CO2 after 20 years at a flow rate of 20 kg/s, an injection temperature of 20 °C and an injection pressure of 10 MPa, showing a significant application potential of the well pattern system.