تجزیه و تحلیل تنش غیر مخرب و رفتار میکرو سازه از آلیاژ تیتانیوم و آلیاژ سپرده لیزر

Titanium alloy (Grade 5) has been regarded as the most useful alloys for the aerospace applications, due to their light weight properties. The addition of copper to this alloy allows the improvement in the mechanical properties. The increase in the laser power has influenced the coarseness of the α-Ti lamella; and thus slows down the cooling rate during solidification.The X ray diffraction method has been used to analyse the residual stresses using the biaxial and shear-stressed model. Very infinitesimal microns were taken into consideration for the penetration depth. The results generated indicate that a decrease in the compressive residual stresses is attributed to the increase in the laser power and the variation of the heat input within the clad during processing. The differences in the thermal expansion with respect to the increase in the volume of deposition as the laser power increases have significanteffect on the compressive residual stress.