ساختار جوش فوم های آلومینیومی ملحق شده به انرژی خورشیدی متمرکز

Concentrated solar energy was applied to welded foam plates in non-protective atmosphere. The filler was a pore-generating aluminium–silicon alloy placed between two commercial aluminium foam plates. The heating device provided enough energy to melt and foam the filler. The heat affected surfaces on foam plates and welding mechanisms were correlated with heating conditions. Test plate thickness controlled filler foaming, and two runs were necessary to complete foaming. Weld characterization through tensile tests and microstructural study was performed. The role of the oxide layer on the weld was analyzed and the main welding mechanisms identified: a mechanical form-fit and a metallurgical connection.