دانلود مقاله ISI انگلیسی شماره 52892
ترجمه فارسی عنوان مقاله

اندازه بهینه سیستم قدرت هیبریدی مستقل از طریق بهینه سازی ازدحام ذرات برای منطقه کهنوج در جنوب شرق ایران

عنوان انگلیسی
Optimal sizing of a stand-alone hybrid power system via particle swarm optimization for Kahnouj area in south-east of Iran
کد مقاله سال انتشار تعداد صفحات مقاله انگلیسی
52892 2009 7 صفحه PDF
منبع

Publisher : Elsevier - Science Direct (الزویر - ساینس دایرکت)

Journal : Renewable Energy, Renewable Energy 34 (2009) 1855–1862

ترجمه کلمات کلیدی
باد سلول توربین سوخت، سیستم قدرت هیبرید، انرژی های تجدید پذیر، اندازه بهینه، بهینه سازی ازدحام ذرات،
کلمات کلیدی انگلیسی
Wind turbine Fuel cell, Hybrid power system, Renewable energy, Optimal sizing, Particle swarm optimization,
پیش نمایش مقاله
پیش نمایش مقاله  اندازه بهینه سیستم قدرت هیبریدی مستقل از طریق بهینه سازی ازدحام ذرات برای منطقه کهنوج در جنوب شرق ایران

چکیده انگلیسی

In this paper a novel intelligent method is applied to the problem of sizing in a hybrid power system such that the demand of residential area is met. This study is performed for Kahnouj area in south-east Iran. It is to mention that there are many similar regions around the world with this typical situation that can be expanded. The system consists of fuel cells, some wind units, some electrolyzers, a reformer, an anaerobic reactor and some hydrogen tanks. The system is assumed to be stand-alone and uses the biomass as an available energy resource. In this system, the hydrogen produced by the reformer is delivered to the fuel cell directly. When the power produced by the wind turbine plus power produced by the fuel cell (fed by the reformer) are more than the demand, the remainder is delivered to the electrolyzer. In contrast, when the power produced by the wind turbine plus that produced by the fuel cell (fed by the reformer) are less than the demand, some more fuel cells are employed and they are fed by the stored hydrogen. Our aim is to minimize the total costs of the system such that the demand is met. PSO algorithm is used for optimal sizing of system’s components.