مدل واکنش ساختاری جهانی برای کشتی های چند عرشه در مرحله طراحی مفهومی

This paper is an attempt to contribute to the improvement of an analysis model within overall structural synthesis procedure for the multi-deck ships. The paper is organized in two parts: modeling principles and model validation. Principles of the proposed generic model formulation on the global and sub-structure levels are given in detail while the load model is briefly summarized. The basic building blocks (macro-elements and gross-elements) for the modeling of ordinary stiffened panels, combining numerical and analytical approaches, are presented and discussed w.r.t. requirements for a multi-deck structure. Different surrogates (sets of elements and ordinary macro-elements) used for equivalent modeling of large side openings are evaluated, since the reduced shear stiffness of superstructure sides has large influence on the hull girder stress distributions along the entire cross section height. The generic ship models developed using outlined principles and the basic building blocks are further validated through complex examples of a large cruise ship and a livestock carrier. On the global level, the accuracy of the generic model w.r.t. the longitudinal stress distribution over ships height is compared with a standard full ship FE model. The results confirmed that the suggested structural modeling principles, based on the generic FE model can be applied for the fast investigation of different structural topological/geometrical concepts as well as for the ordinary scantling/material optimization.