یک مدل سازنده مبتنی بر میکرومکانیکی برای خاک های کامپوزیتی ریز فیبری

Composite soils such as municipal solid wastes (MSWs), peats, and reinforced soils are generally composed of multiple phases with different properties. Numerical modeling of these soils which takes the individual constituents into account might be impractical as it requires great computational efforts. Hence, geotechnical practitioners may prefer to treat a representative material which accounts for the whole mechanical aspects of the composite soil. In the current study, a constitutive model has been developed which treats the fine-grained composite soils in two general phases: matrix (paste) and fiber. To represent the behavior of these phases, two distinct constitutive models are used: (1) an anisotropic critical state-based constitutive model for matrix phase and (2) a Von-Mises type model for fiber phase. In order to consider the composite soil as a single phase homogeneous material, a volumetric homogenization procedure is used based on the micromechanical theories. Accordingly, strain concentration tensor is developed which determines the equivalent stiffness tensor for the homogenized soil. Based on the hypotheses derived from the experimental observations, the basic model is gradually enhanced in order to account for some important aspects of composite matters including fibers orientation, fibers discontinuity, and slippage-mobilization of fibers within the matrix phase. The effect of these aspects on the overall response of soil under monotonic loading is studied. Reasonable performance of the proposed model is demonstrated by the results of triaxial compression tests on reinforced clay with nylon and palm fibers.