منحنی انحصاری مقاومت لبه در ارتباط با قطبش شعاع گرد

The results of a combined computational and experimental research into the fracture resistance of ceramic materials by specimen edge chipping are provided. The chipping was performed with conic diamond indenters that had spherical tip radii of 100, 200 and 400 μm. The computational analysis was conducted on the basis of finite element modeling by means of ANSYS software. The parameters of the basic distances in an analysis of the stress, strain, and displacement fields in the chipping zone for the tests (upper and lower limit) have been established for the above-mentioned indenters in order to ensure the correct comparative assessment of the materials under research. Unified curves of edge chipping resistance of the ceramic materials have been obtained for the indenters with various spherical tip radii.