روش موقعیت گسل برای شبکه های توزیع با استفاده از متر هوشمند

The ongoing deployment of smart meters, with data processing and communication features, has provided the opportunity to improve distribution systems performance. This paper presents a state estimation-based method for fault location in distribution networks using the measurements provided by the smart meters. During the normal operation of the system, state estimation methods can handle the errors in real or pseudo-measurements to give the best estimate of the system state and to identify large measurement errors, called bad data. This concept is extended in this paper under fault conditions where the fault is considered as an unknown and temporarily connected load which can be dealt with as bad data. The proposed method uses the changeable weighting matrix bad data identification technique to find the fault location. The method is algorithmically simple and does not require the fault type. The fault location accuracy is verified by extensive simulation tests on a real 13.8 kV, 134-node distribution network for different fault scenarios. The results indicate that the method has a good performance under measurement and load data errors and for different number and locations of the smart meters in the network.