دانلود مقاله ISI انگلیسی شماره 95819
ترجمه فارسی عنوان مقاله

مدلسازی و شبیه سازی یک نیروگاه نیروی زغال سنگ برای بهینه سازی راه اندازی

عنوان انگلیسی
Modelling and simulation of a coal-fired power plant for start-up optimisation
کد مقاله سال انتشار تعداد صفحات مقاله انگلیسی
95819 2017 13 صفحه PDF
منبع

Publisher : Elsevier - Science Direct (الزویر - ساینس دایرکت)

Journal : Applied Energy, Volume 208, 15 December 2017, Pages 319-331

ترجمه کلمات کلیدی
شبیه سازی دینامیک، زغال سنگ، نیروگاه، انعطاف پذیری، شروع، کنترل، طول عمر،
کلمات کلیدی انگلیسی
Dynamic simulation; Coal; Power plant; Flexibility; Start-up; Control; Lifetime;
ترجمه چکیده
تاثیر افزایش یافته از منابع انرژی نوسان مانند باد و فتوولتائیک به طور قابل توجهی بر رژیم عملیاتی نیروگاه های متعارف تأثیر می گذارد. در آینده ای نزدیک، حتی نیروگاه های پایه بار اولیه مانند گیاهان لیگنیتی بزرگ در آلمان باید شروع به تعطیل و تعطیل کردن سیستم برق کنند. همانطور که آغازگرهای مکرر در مقیاس بهینه سازی در گذشته نبود، انتظار می رفت که پتانسیل گسترده ای برای کاهش هزینه های راه اندازی و اثرات زیست محیطی داشته باشد. برای بررسی چنین پتانسیل های بهینه سازی، یک مدل شبیه سازی دینامیکی جامع از جمله اجزای فرآیند مانند چرخه دیگ بخار و بخار آب، همچنین سیستم کنترل نیروگاه و کنترل توالی شروع شده است. پس از موفقیتآمیز یک شروع مرجع نیروگاه، از این مدل برای شناسایی محدودیت برای شروع سریعتر، مصرف سوخت کمتر و انتشار کمتر استفاده شده است، در حالی که فشارهای حرارتی و مکانیکی ناشی از رمپ های بالاتری را در حد قابل قبول حفظ می کند.
پیش نمایش مقاله
پیش نمایش مقاله  مدلسازی و شبیه سازی یک نیروگاه نیروی زغال سنگ برای بهینه سازی راه اندازی

چکیده انگلیسی

The increased impact from fluctuating energy sources like wind and photovoltaics significantly affects the operational regime of conventional power plants. In the near future, even former base load power plants such as the large-scale lignite plants in Germany will need to start and shut down to balance the electricity system. As frequent starts were not in the focus of optimisation in the past, an extensive potential can be expected to reduce start-up costs and environmental impacts. In order to investigate such optimisation potentials, a comprehensive dynamic simulation model has been developed including process components such as boiler and water-steam cycle but also the power plants control system along with start-up sequence control. After successfully reproducing a reference start of the power plant, the model has been used to identify restrictions for faster start-ups, less fuel consumption and less emission while keeping the thermal and mechanical stress, caused by higher ramp rates, within acceptable bounds.