طرح ریزی کار با کارآیی کامل با روباتیک با دقت بالا با اجتناب از اجتناب از نیرو

The presented paper proposes an analytical force overshoots free control architecture for standard industrial manipulators involved in high-accuracy industrial assembly tasks (i.e., with tight mounting tolerances). As in many industrial scenarios, the robot manipulates components through (compliant) external grippers and interacts with partially unknown compliant environments. In such a context, a force overshoot may result in task failures (e.g., gripper losses the component, component damages), representing a critical control issue. To face such problem, the proposed control architecture makes use of the force measurements as a feedback (obtained using a force/torque sensor at the robot end-effector) and of the estimation of the equivalent interacting elastic system stiffness (i.e., force sensor– compliant gripper–compliant environment equivalent stiffness) defining two control levels: (i) an internal impedance controller with inner position and orientation loop and (ii) an external impedance shaping force tracking controller. A theoretical analysis of the method has been performed. Then, the method has been experimentally validated in an industrial-like assembly task with tight mounting tolerances (i.e., H7/h6 mounting). A standard industrial robot (a Universal Robot UR 10 manipulator) has been used as a test-platform, equipped with an external force/torque sensor Robotiq FT 300 at the robot end-effector and with a Robotiq Adaptive Gripper C-Model to manipulate target components. ROS framework has been adopted to implement the proposed control architecture. Experimental results show the avoidance of force overshoots and the achieved target dynamic performance.