اثر بافت ماشین حفره بر روی نیروی خروجی در قالب گیری میکرو

The friction force developed in the demolding phase of the micro injection molding process is mainly determined by mold surface finish, which affects the tribological phenomena occurring at the polymer–tool interface. In this work, the effects on the ejection force of two cavity surfaces machined with different technologies (viz. micro milling and micro electro discharge machining), but with similar value of Ra, were investigated. The relations between different surface topography parameters and the ejection force were then analyzed, in order to identify the parameters that most appropriately describe the friction at the polymer–tool interface. The experimental results showed the strong interactions between the mold surface texture and the micro injection molding process parameters that promote the replication, such as mold temperature and holding pressure. The different machining technologies generated two mold textures that have a similar value of Ra, but their influence on friction can be properly described only using several other surface topography parameters.