بررسی ارتقاء یکنواختی دما برای بسته باطری طراحی شده با جریان مایع در فرایند خنک کننده

To keep the temperature of the battery pack at an optimal range for electric vehicles (EV), a liquid heat exchange structure is designed using aluminum flat tube bank. The flexible graphite is used to enhance the heat transfer of the battery thermal management, and its effect and a proper cooling method are explored. The investigation focuses on the thermal characteristics in the process of the BTM, such as the equilibrium temperature, temperature variation rate, and temperature difference, etc. The results show that the battery pack has a good cooling and lightweight effect, and the maximum temperature difference of the battery cells could be kept below 5 °C. The temperature uniformity of the battery pack is improved obviously by using the flexible graphite. Meanwhile, the cascade cooling method can reduce the drastic temperature fluctuation and improve the temperature uniformity of the battery pack under non-equilibrium states. In addition, the BTM is not sensitive to the variation of the liquid flow in the experimental conditions, and this will benefit to reduce power consumption of the pump.