استحکام برشی رابط های بین خاک های غیر اشباع و ژئوتکستایل کامپوزیت با تقویت نخ های پلی استر

Composite geotextiles with polyester yarn reinforcement have been commonly used in combination with unsaturated soils. Both unsaturated and saturated shear strength of the interfaces were investigated between a composite geotextile and three major types of materials: silty sand (SM), low-plasticity silt (ML) and high-plasticity clay (CH) in a direct shear box. The interfaces were formed using two methods (A and B) to reflect the wide range of possible contact conditions in practice. Method A involved statically compacting the soil directly on top of the composite geotextile, while for Method B, the soil was statically compacted in a separate mold and later brought into contact with the composite geotextile. Type B interfaces required a larger displacement to mobilize the shear strength than Type A interfaces. The ultimate failure envelopes of SM and ML soils were similar to those of their interface shearing. Notably, the failure envelopes for the clay-geotextile interface of both types were higher than that of clay alone. The unsaturated soil-only shearing had a higher peak strength and tended to dilate more than saturated soil-only shearing, while unsaturated soil-interface shearing appeared to be more contractant than saturated interface shearing. The strength variations with suction for all tested soils and interface shearing were clearly non-linear. A new model that takes account of the condition of soil-geotextile contact intimacy is proposed for predicting the variation of interface strength with suction, based on the variation of the soil's apparent cohesion with suction and the geotextile-water retention curve.